XC809T

XC809T multi-function lathe CNC system is a new generation CNC system developed by our company. It adopts 32-bit high-performance microprocessor, real-time multi-task control technology and hardware interpolation technology, fully linked, high-speed small line segment look-ahead algorithm. 0.001mm interpolation accuracy, maximum speed 30m/min.

Check Current Price

XC809T CNC System Hardware and Software Features:

  • Based on 32-bit microprocessor, fully linked, 0.001mm interpolation accuracy, maximum speed of 30 m / min, support direction + pulse and quadrature pulse.
  • With a 7-inch color widescreen LCD, resolution 800X480, Windows interface style. Equipped with 8 soft function keys, the operation is simple and easy to learn. Provide rich display interface such as parameter classification, alarm log, system diagnosis, etc., convenient for debugging and maintenance.
  • International standard G-commands, compatible with FANUC system commands.
  • Full-screen editing of the part program, built-in 512M massive program, can store 500 parts program.
  • With USB interface, support U disk file reading and writing, data backup.
  • Input 24 (expandable to 96) points, output 24 (expandable to 96) points (custom, flexible and convenient.
  • Chinese/English operation interface, complete help information, and more convenient operation.
  • Support knife length tool compensation and radius tool compensation.
  • Support hand wheel trial processing, convenient program debugging.
  • Support multi-level operation rights, convenient device management, and limited time system locking.
  • Support GG, Mastercam, PowerMill, FeatureCAM and other third-party software G code files.
  • Support self-programming tool magazine, flexible use of a variety of tool magazines, servo turrets.
  • The two-spindle support spindle 2 synchronizes with the spindle 1 to achieve flying cutter cutting (requires dual servo spindle).
  • Dual spindle positioning for double-head machining.
  • Simultaneous operation – a feeding program for efficient machining.
  • Supports side drilling and tapping spindle 2 position interpolation tapping.

Size

Technical Specifications

Number of control axes3~6 axis (X, Y, Z, A, B, C)
Number of linkage axisfull linkage
Tool magazine:Support, need to edit the magazine code
Spindle2 analog spindles, where the spindle 1 can use a digital spindle (occupying a digital axis)
Spindle monitoringYes
Minimum command unit0.001millimeter
Maximum command value±99999999 × minimum command unit
Rapid feed rate30000millimeter/min
Rapid feed rate overrideF0, 25%, 50%,75%, 100%
Cutting feed rate12000millimeter/min
Pulse mode1: direction + pulse 2: quadrature pulse (if the driver supports, recommended, anti-interference is stronger)
Maximum frequency100 KHz, 200 KHz, 500 KHz can be set. (500 KHz can only be realized in all axes orthogonal output mode)
Feed rate override0~150%
Electronic gear ratio1~65535: 1~65535
Automatic acceleration & decelerationYes
High-speed small line segment look-ahead algorithmYes
Hand wheel trial processingYes
PositioningG00 (linear interpolation positioning)
Interpolationstraight line (G01), arc (G02/G03/G12), helical interpolation
Return to reference pointAutomatically return to reference point (G28)
LCD7-inch TFT LCD screen, resolution 800X480
MDI software keys8
Single step to givex1,x10,x100
communication interfaceU Disk interface
External hand wheel interfaceYes
I/O Interface24/24(Extensible to96/96)
Pause (seconds)Yes
Quasi-stop statusYes
Quasi-stopYes
Storage trip checkYes
MDI OperationYes, support multi segment operation.
ResetYes
Jump switchYes
Single-stage operationYes
Program protection switchYes
Self-diagnostic functionYes
Emergency stopYes
Power supplySingle Phase Input 100~240V AC 1.52A 50/60 Hz±1, Output 24V DC 3.2A
Coordinate systemMachine coordinate system (G53), workpiece coordinate system (G92, G54~G59), local coordinate system (G52), coordinate system plane designation
Automatic coordinate system settingYes
Decimal point inputYes
Auxiliary Functions
Auxiliary functionM2 digits, M code customization, manual / MDI / automatic mode to control the spindle forward, reverse, stop; control the coolant start and stop.etc
Spindle Function
Spindle functionSimulated spindle, Double spindle
Digital spindleSupported by spindle 1, occupies one digital axis (Z axis does not support), and the rotation speed is more stable.
TappingSupport
Spindle analog outputYes, dual spindles
Knife Function
Tool functionSupport automatic tool change, support split centering knife, 3-point centering tool
Tool compensation memory-9999.999~9999.999, 99
Tool compensationtool length tool radius and radius tool compensation
Editing Operation
Editing functionParameters, diagnostic bit input, program editing, MDI Multi program execution
storage capacity512M
Number of stored programs500
program name displayChinese, English, numbers and combinations
Program line lookupYes
Skip the optional blockYes
Program switchYes
Display
DisplayChinese, English, Switchable
Processing time, the number of partsYes
Spindle speed, M/S commandYes
Dimensions (mm)Dimensions (height × width × thickness) 390×253×80
Opening size (height x width)370×228

Video

XC809T (2) CNC lathe [cnc controller]
XC809T Multifunctional Lathe CNC Process Thread
Chinese cnc turning stand -XC809T

2 thoughts on “XC809T”

Leave a Comment