A variable frequency drive (VFD) is an electronic device that is used to control the speed and torque of an AC electric motor. It does this by adjusting the frequency and voltage of the power supplied to the motor. A VFD that has a single-phase input can be used to control a three-phase motor by converting the single-phase input power into three-phase power for the motor.
The VFD has a rated power of 750W and includes an RS485 interface, which is a standard for serial data communication. The RS485 interface allows the VFD to be connected to a computer or other device for remote control and monitoring.
To use the VFD to control a three-phase motor, you will need to connect the motor to the VFD according to the manufacturer’s instructions. You will also need to program the VFD with the appropriate settings for the motor, such as the desired speed and torque. It is important to follow the manufacturer’s instructions and guidelines for installing and using the VFD, as improper installation or use could result in damage to the equipment or personal injury.
220V single input single output: single-phase 220V input, single-phase 220V output. There are two wires of the motor, single capacitance or double capacitance on motor
220V single in three out: single-phase 220V input, three-phase 220V output. There are two wires in the motor, and there is no capacitor on the motor
380V three in three out: three-phase 380V input, three-phase 380V output. There are three wires in the motor
220V to 380V single in and three out: single-phase 220V input, three-phase 380V output. Three wires of the motor
Wiring
Diagram
Installation dimension
Add Modbus-RTU
