Soldering Station

What is the soldering station for?

A soldering station is a soft brazing equipment that can be used to solder electronic components. The soldering station consists of the main unit, a soldering tool, and accessories. The soldering tool can be connected to the main unit, which has a temperature adjustment knob, power switch, indicator light, and other parts. The main unit can supply heat to the solder (wire) and make it melt. Bracket and soldering iron head cleaner, etc. are accessories.

What is the difference between a soldering iron and a soldering station?

Soldering station and soldering iron are common soldering tools, and the operation is similar, however, the soldering iron belongs to the low-end and primary soldering tools, while the soldering station is a comparison of the standard soldering equipment.

The main difference between the soldering station and the soldering iron

  • A soldering station generally has an anti-static function, electric soldering iron is not.
  • The soldering station can control the temperature, the life of the head of the iron and the life of the heating core is much higher than the head of the soldering iron.
  • Soldering station soldering efficiency is relatively high compared to the electric iron, the thermal efficiency can reach about 80%, and the electric iron is at most 50%.
  • Soldering station energy consumption is lower than the soldering iron, the same welding effect, the soldering station with much less electricity than the soldering iron.
  • The welding table handle voltage is only AC 24 volts, in the safe scale, a will not appear electrocution scene.
  • The corresponding welding efficiency is higher when the table is back to the temperature faster.

Best Professional Soldering Station

2 in 1 750W Soldering station LCD Digital display welding rework station for cell-phone BGA SMD PCB IC Repair solder tools 8898
Hot air heater and welding iron 2 in1 rework soldering station

The soldering station is used for mobile phone BGA SMD PCD repair, Hot air heater, and 2-in-1 iron welding rework station. A dual LCD digital display can display accurate temperature. It has a very low noise and space-saving design. The intelligent self-checking function has a safe personal operation function. The automatic cooling function can effectively extend the service life of the heater and protect the hot air heater.

Hot air gun
Working Voltage: AC220-240V OR AC100-130V
Frequency: 50Hz/60Hz
Output Power: 750W
Temperature Range: 100°C~500°C
Temperature Stability:±1℃
Air Flow: 150L/min (max)

Soldering iron
Working Voltage: AC220-240V OR AC100-130V
Output Power: 80W
Frequency: 50Hz/60Hz
Temperature Range: 180°C-500°C
Temperature Stability: ±1°C
Soldering Iron: ESD design
Heater Material: Ceramics

How to use:
1. Clean the electronic components to be soldered.
2. Once iron reaches temperature (not too high, recommend 300-400℃).
3. Apply a little solder to the heated iron tip to prevent oxidation, then rub the iron tip to evenly extend the solder to the surface of the iron tip.
4. Start to solder

Leave a Comment