For processing, control parameters related to the operation
Manual operation: can be achieved manually, jog back to the program zero, back to mechanical zero, cleared coordinate operations.
Program management: program can create, delete, modify, read, save, save, automatic processing, continuous, and pause.
Manually define a variety of external functions to facilitate the use of
Freedom to select the input function: the limited input port can achieve a variety of user needs
CNC system consists of the following components:
High-performance, high-speed 32-bit ARM CPU
Liquid crystal display (resolution: 320 × 240)
Input / Output (10MA 16 opto-isolated inputs and 16 opto-isolated output pull-down tank flow 500MA)
Users machining program memory can be implemented in any storage TF card
The smallest unit of data 0.0001mm
The maximum data size ± 99999.999mm
Maximum pulse output frequency 50KHz (-axis simultaneous 50KHZ)
Control axes 4 axis (X, Y, Z, A)
4-axis linkage axis and has a micro-multi-multi-axis interpolation control line forward
Appearance and Panel: Dimensions: length 165*101*50
How to upgrade SMC4-4-16a16b firmware
1,After unzip the file inside a CNC 4S.MD5, please copy it to the root directory of TF, (note that a single file, not including folders)
2，Shutdown, the TF card into the controller, the boot while holding down three keys
3，After doing the above two steps, then we will enter an upgrade interface, followed by the 3 key, A progress bar will move forward when the two progress bar to complete, on their own jump to the main interface, the key, the upgrade is complete, the system parameters Check for damage,
NOTE: Wait for the system on their own to complete before the shutdown, can not do many of the same version upgrade.
updata firmware need your series No. please leave massage here https://www.shaogecnc.com/smc4-4-16a16b/