RichAuto-A18

A18E/A18S DSP controller 1. This is the original brand : RichAuto2. DSP controller for cnc router,USB connect can be use without computer3. suitable for 4 axis 4. apply for 4 axis  cnc machine5. we have set up the English version before deliver Check Current Price RichAuto A18 DSP controller include A18E AND A18S two Version.For the Operation and its system, it is all same. It could set the … Read more

RichAuto-A12

A12E/A12S DSP controller 1. This is the original brand: RichAuto2. DSP controller for CNC router can be used without the computer3. suitable for 3 axis4. A112E/A12S the same as 0503. The function has improved, use in the same way, A12E/A12S have replaced 0503 from 2015   5. we have set up the English version before deliver … Read more

XC609M

XC609M CNC Control System is a latest multi-functional CNC system. It supports milling, boring, tapping, drilling and automatic feeding. It adopts 32-bit high-performance microprocessor, real-time multi-task control technology and hardware interpolation technology, fully linked, 0.001mm interpolation precision, speed 12m/min. Check Current Price Features Based on 32-bit microprocessor, full linkage, 0.001mm interpolation accuracy, and speed up to … Read more

GRBL 1.1 USB Engraving Machine Control Board

Specification of offline controller Press Z+ and Z- , the Z axis will move up and down.Press X+ and X- , the X axis will move left and right.Press Y+ and Y- , the Y axis will move Front and Back.Press SPIN: Spindle on (Laser on), Spindle off (laser off)Press SMOD: returnPress Z+ for 5 … Read more

4 axis CNC

What is a 4-axis machining center? 4-axis machining center Machining center: usually refers to a CNC milling machine with a tool magazine. CNC milling machine is also called CNC (Computer Numerical Control) milling machine. CNC milling machine is an automatic processing equipment developed on the basis of general milling machines. The processing technology of the … Read more

Stepper Motor Driver

The stepper motor driver is an actuator that converts electrical pulses into angular displacement. When the stepper driver receives a pulse signal, it drives the stepper motor to rotate a fixed angle (called “step angle”) in a set direction, and its rotation runs step by step at a fixed angle. The angular displacement can be … Read more

Panasonic Servo Alarm

Panasonic Servo Alarm 16.0 is overload protection. When the actual value of the torque command exceeds the overload level set by parameter Pr5.12, the overload protection function is activated according to the motor’s overload protection time limit characteristics.Alarm reason: The motor runs under heavy load for a long time, and its effective torque exceeds the … Read more

Stepper motor VS Servo motor

Why is it said that the stepper motor is an open loop, and the servo motor is a closed loop If the stepping motor adopts the servo-corresponding control method, it has most of the characteristics of the servo, but the cost is only 1/2 of the servo, and the servo does not have the problem … Read more

STARCAM nesting software V4.5

StarCAM4.5 original genuine Check Current Price Brief introduction of automatic common edge continuous cutting nesting software StarCAM automatic common edge continuous cutting nesting software is composed of three modules: drawing module (StarCAM), nesting module (StarNEST) and numerical control cutting code simulation module (StarPLOT). Each module can run independently or call each other. Support the NC … Read more