MACH3 Ethernet port 6-axis Motion Controller NVEC400

A CNC motion control card is a device that is used to control the movement of a CNC (computer numerical control) machine. It typically consists of a circuit board that is installed in the CNC machine and is connected to the machine’s motors and other components. The card receives commands from a computer or other control system and converts them into electrical signals that are used to drive the motors and other components of the CNC machine.

The NVEC400 CNC motion control card is a specific model of motion control card that is designed for use with the MACH3 software, which is a popular software package for controlling CNC machines. It features an Ethernet interface, which allows it to communicate with the MACH3 software over an Ethernet network.

The NVEC400 CNC motion control card is suitable for use with a wide range of CNC machines, including engraving machines, drilling machines, and milling machines. It can control up to four axes of motion and includes a variety of input and output channels that allow it to interact with other devices, such as limit switches and spindle motors.

In order to use the NVEC400 CNC motion control card, you will need to install it in your CNC machine and connect it to the machine’s motors and other components. You will also need to install the MACH3 software on a computer and configure it to communicate with the motion control card over the Ethernet network.

Novusun CNC has engaged in the Numerical control industry for 7 years, specializing in the research, development, and production of various CNC controller systems with high quality and high reliability. We produce the Brushless DC motor, Stepper motor driver, and also 1 to 6-axis CNC motion controllers.
NVEC400 is the 4-axis motion controller we spend 1-year designing.
NVEC400 supports Mach3 software, through an ETHERNET port to communicate with the computer.
This manual introduces the operation, connection, and usage schedule of our professional motion controller for engraving machines. Through a lot of the drawings, the users can learn quickly how to use this motion controller.

Check Current Price

Support Ethernet port; 
16 ports photoelectric isolated input interface;
12 ports photoelectric isolated output interface;
1 port 0-10V spindle speed analog output interface(can change to PWM output);
2 relay output.  
can support 6-axis stepper systems,400KHz pulse output for every axis;
ARM motion control chip;
the main device is 12V-32VDC power supply input, the current should be higher than 1A