NVBDH+ Brushless Motor Driver with Hall
A brushless DC (BLDC) motor driver controller is a device that controls the speed and direction of a brushless DC motor. It typically consists of a power amplifier that drives the motor and a control circuit that reads feedback from the motor and adjusts the power amplifier accordingly.
The specific motor driver the NVBDH+ NVBDL+ Brushless DC Motor Driver Controller, is a 400W digital motor driver with a display screen that is designed for use in CNC milling machines. It is likely that this motor driver is used to control the spindle of the CNC milling machine, which is the part of the machine that rotates the cutting tool.
In order to use this motor driver, you will need to connect it to the brushless DC motor that you want to control, as well as to a power source and a control system. The control system could be a computer or microcontroller that sends commands to the motor driver, telling it how fast to spin the motor and in which direction. The motor driver will then amplify the electrical power from the power source and apply it to the motor in order to achieve the desired speed and direction.
It is important to carefully follow the manufacturer’s instructions for installing and using this motor driver in order to ensure proper operation and safety.

1、Maximum 400W power output
2、48VDC power input
3、Control panel potentiometer control, external voltage control, external PWM control 3-speed control mode
4、The control panel starts and stops、2 external IO start-stop mode
5、12000 RPM maximum speed control
6、M542 standard heat shell + plastic shell
7、Fit the engraving machine DC brushless spindle drive control
8、400W brushless DC spindle motor +ER8 chuck
9、With 1.5 meters motor extension line
10、The control panel can be removed and installed with the subscriber cabinet
NVBDL+ Brushless Motor Driver without Hall

– Max. 400W power output
– DC48V input
– 3-speed adjustment modes, control panel potentiometer control, external voltage control, external PWM control
– 2 modes, control panel start-stop, external IO start stop
– 12000 RPM/min maximum speed control
– M542 standard cooling shell + plastic shell
– For the engraving machine, the brushless DC spindle drive controller
– The control panel can be removed and installed with the user cabinet.