RichAuto-A11

This is the original brand : RichAutoDSP controller for cnc router,USB connect,can be use without computer.Suitable for 3 axis.A11E/A11S the same as 0501. The function have improve, use in the same way.A11E/A11S have replaced 0501 from 2015. Check New Price Product Model RichAuto DSP A11 CPU DSP Internal Memory 512MB Display Screen 128*64 Monochrome LCD Communication Port U disk / USB cable Controlled Axis Number 3 axes Control Signal differential signal Drive System […]

Read More

RichAuto-A18

A18E/A18S DSP controller 1. This is the original brand : RichAuto2. DSP controller for cnc router,USB connect can be use without computer3. suitable for 4 axis 4. apply for 4 axis  cnc machine5. we have set up the English version before deliver Check New Price RichAuto A18 DSP controller include A18E AND A18S two Version.For the Operation and its system, it is all same. It could set the […]

Read More

RichAuto-A12

A12E/A12S DSP controller 1. This is the original brand: RichAuto2. DSP controller for CNC router can be used without the computer3. suitable for 3 axis4. A112E/A12S the same as 0503. The function has improved, use in the same way, A12E/A12S have replaced 0503 from 2015   5. we have set up the English version before deliver […]

Read More

XC609M

XC609M CNC Control System is a latest multi-functional CNC system. It supports milling, boring, tapping, drilling and automatic feeding. It adopts 32-bit high-performance microprocessor, real-time multi-task control technology and hardware interpolation technology, fully linked, 0.001mm interpolation precision, speed 12m/min. Check Price Features Based on 32-bit microprocessor, full linkage, 0.001mm interpolation accuracy, and speed up to 12 […]

Read More

GRBL 1.1 USB Engraving Machine Control Board

Connection: USB (USB-CH340)Software: GRBL controller, Universal Gcode SenderMaster chip: atmel 328P (arduino nano)Stepper motor driver: A4988Spindle drive chip: MOSFET, the highest 60V (recommendation within 48V, current :within 10A )Support stepper motor: 12V, maximum current of 2A or less is recommended within 1.5A and additional heat. (Any stepper motor 42, 57)Laser engraving: Support Check More Specification […]

Read More

4 axis CNC

What is a 4-axis machining center? 4-axis machining center Machining center: usually refers to a CNC milling machine with a tool magazine. CNC milling machine is also called CNC (Computer Numerical Control) milling machine. CNC milling machine is an automatic processing equipment developed on the basis of general milling machines. The processing technology of the […]

Read More

Stepper Motor Driver

The stepper motor driver is an actuator that converts electrical pulses into angular displacement. When the stepper driver receives a pulse signal, it drives the stepper motor to rotate a fixed angle (called “step angle”) in a set direction, and its rotation runs step by step at a fixed angle. The angular displacement can be […]

Read More

Panasonic Servo Alarm

Panasonic Servo Alarm 16.0 is overload protection. When the actual value of the torque command exceeds the overload level set by parameter Pr5.12, the overload protection function is activated according to the motor’s overload protection time limit characteristics.Alarm reason: The motor runs under heavy load for a long time, and its effective torque exceeds the […]

Read More